PowerMaster 205
Aluminium welding and plasma cutting from one 230 V machine.
The PowerMaster 205 combines 200 A AC/DC TIG, 160 A stick and a 50 A plasma cutter. It runs on 230 V, so one unit handles cutting and welding in the shop, in the pits and in the service van.
The plasma severs up to 16 mm steel and gives a clean cut to about 10 mm. The HF pilot arc also starts on painted and rusty surfaces.
On the TIG side AC balance, AC frequency, pulse, pre- and post-flow and slopes are all adjustable. The full-size control panel shows every value at once.
Plasma cutting needs dry compressed air from a compressor. TIG welding needs argon, tungsten and filler.
Technical data
Electrical
| Input voltage | 230 V, single-phase |
|---|---|
| Fuse | 16 A |
| Input current | 26 A (inrush max 32.1 A) |
TIG
| TIG output | 5–200 A |
|---|---|
| TIG duty cycle (40 °C) | 200 A @ 60 % |
Stick (MMA)
| Stick output | 5–160 A |
|---|
Plasma cutting
| Plasma output | 50 A |
|---|---|
| Severance cut, max | 16 mm |
| Clean cut, max | approx. 10 mm |
| Air supply | 6 bar · 200 l/min |
Controls
| Pulse frequency | 0.5–250 Hz |
|---|---|
| Pulse background current | 5–95 % |
| AC frequency | 20–250 Hz |
| AC balance | 10–90 % |
| Pre-flow | 0–10 s |
| Post-flow | 0–25 s |
| Upslope | 0–10 s |
| Downslope | 0–25 s |
| Arc start | HF / Lift |
| Torch trigger | 2T / 4T |
Build
| Cooling | fan, AUTO / MANUAL |
|---|---|
| Enclosure rating | IP21S |
| Dimensions (L × W × H) | 470 × 235 × 435 mm |
| Weight | 27 kg |
| Approvals | CE |
| Warranty | 24 months, including professional use |
Compatible accessories
PedalPRO foot pedal, 7-pin
Control current with your foot while welding. Fits e.g. SuperTIG 200EX and 250EX.
Tuontitukku.fi ↗
Consumables kit SC50 / PP60
Consumables for 50–60 A plasma cutters.
Tuontitukku.fi ↗
Ceramic shield cup
Ceramic cup for P80 torches on 60–100 A machines.
Tuontitukku.fi ↗
TIG torch consumables kit, 18 pcs
Collets, collet bodies and cups for WP-17/18/26 torches.
Tuontitukku.fi ↗