PL80D
The workshop workhorse: 25 mm clean cut.
The PL80D cuts cleanly through 25 mm steel and severs up to 32 mm. Input current is 18 A, so it runs on 16 A fuses. The 4 m torch uses a Euro connector and common Panasonic-type (P80) consumables.
P80 consumables are widely available and inexpensive, which keeps cost per cut down. Cuts steel, stainless, aluminium and copper.
Requires compressed air and a 16 A three-phase plug (plug sold separately).
Technical data
Electrical
| Input voltage | 400 V, 3-phase |
|---|---|
| Input current | I1max 22.8 A · I1eff 18 A |
| Fuse | 16 A |
| Open-circuit voltage | 240 V |
Plasma cutting
| Plasma output | 20–80 A |
|---|---|
| Severance cut, max | 32 mm |
| Clean cut, max | 25 mm |
| Duty cycle | 60 % |
| Air supply | cutting pressure 2.5–5 bar · 250 l/min |
| Post-flow (air) | automatic 0–60 s |
| Arc start | HF pilot arc |
| Torch | 4 m, Euro connector, P80 consumables |
| Work cable | 300 A, 3 m |
Build
| Cooling | fan + air, AUTO / MANUAL |
|---|---|
| Dimensions (L × W × H) | 515 × 230 × 395 mm |
| Approvals | CE, RoHS |
| Warranty | 24 months |
Compatible accessories
Consumables kit PP80, 22 pcs
10 nozzles, 10 electrodes and 2 swirl rings for P80 torches.
Tuontitukku.fi ↗
Consumables kit PP80, 1.5 mm
1.5 mm nozzles and electrodes for 80–100 A cutting.
Tuontitukku.fi ↗
Ceramic shield cup
Ceramic cup for P80 torches on 60–100 A machines.
Tuontitukku.fi ↗
Circle guide + roller 80 A
Circles up to 80 cm diameter, 40 cm arm.
Tuontitukku.fi ↗
Torch roller 80 A
Steady stand-off and straight lines. Fits 30–37 mm.
Tuontitukku.fi ↗
Solenoid valve 36 V AC (spare)
Air valve for 60–80 A plasma cutters.
Tuontitukku.fi ↗Other models in the range
PL100D
The most powerful Granhult plasma: cuts 35 mm.
PL60D
60 A three-phase plasma, CNC-ready.
PL50D
Plasma from a regular socket.
Plasma 80 Air
Compressor built in. Plug in and cut.
Plasma 60 Air
Self-contained plasma: no hoses, no separate compressor.