FIEN

Side by side

Compare

Duty cycle is the share of 10 minutes the machine can weld at the stated current at 40 °C. For plasma, clean cut is the thickness with a tidy, low-dross edge; severance is the maximum thickness it will part.

AC/DC TIG

Model	Processes	Input	TIG max	Stick max	Duty cycle	Pulse	Torch	Weight
SuperTIG 315EX	TIG AC/DC · MMA	400 V 3~	315 A	250 A	315 A @ 35 %	0.2–250 Hz	Water (torch std.)	36 kg
SuperTIG 250EX	TIG AC/DC · MMA	400 V 3~	250 A	200 A	250 A @ 60 %	0.5–250 Hz	Gas / water	–
SuperTIG 200EX	TIG AC/DC · MMA	230 V 1~	200 A	160 A	160 A @ 60 %	yes	Gas / water	25 kg
MicroTIG 185DA	TIG AC/DC · MMA	230 V 1~	185 A	150 A	185 A @ 35 %	1 / 50 Hz	Gas	–

TIG + plasma

Model	Processes	Input	TIG max	Stick max	Plasma	Duty cycle	Pulse	Weight
PowerMaster 205	TIG AC/DC · MMA · Plasma	230 V 1~	200 A	160 A	50 A / 16 mm	200 A @ 60 %	0.5–250 Hz	27 kg
PowerMaster 256	TIG AC/DC · MMA · Plasma	400 V 3~	250 A	200 A	60 A / 25 mm	200 A @ 100 %	0.5–250 Hz	28 kg

Plasma cutters

Model	Input	Current	Clean cut	Severance	Air	Compressor	Weight
PL100D	400 V 3~	100 A	–	35 mm	6.5 bar · 280 l/min	external	20 kg
PL80D	400 V 3~	80 A	25 mm	32 mm	250 l/min	external	–
PL60D	400 V 3~	60 A	19 mm	25 mm	200 l/min	external	–
PL50D	230 V 1~	50 A	10–12 mm	20 mm	6 bar · 200 l/min	external	15 kg
Plasma 80 Air	400 V 3~	80 A	18 mm	35 mm	built-in	built-in	–
Plasma 60 Air	400 V 3~	60 A	–	25 mm	built-in	built-in	–

MIG/MAG

Model	Processes	Input	MIG	Stick max	Duty cycle	Wire	Spool	Weight
PowerMIG 250S	MIG/MAG · MMA	400 V 3~	30–250 A	200 A	160 A @ 100 %	0.6–1.0 mm	5 kg	–
PowerMIG 210S	MIG/MAG · MMA	230 V 1~	200 A	175 A	130 A @ 100 %	0.6–0.8 mm	5 kg	–